(207) 689-0100/ cell (207) 216-0645
(207) 689-0100/ cell (207) 216-0645
Oval ho wood handles are boring, customize your knives. This is a white #1 steel kiritsuke slicing knife, with a indigo dyed flame maple handle, red sandalwood ferrule and wenge butt. Perfection in just a few days, and all from wood laying around in my shop.
Maybe you want a new knife, you can buy an inexpensive carbon steel Japanese knife with a D-shaped handle and I will customize it for you. My kiritsuke for work, a razor sharp blue #2 blade with a curved handle assembled from yellow box burl and coolibah burl with a snakewood butt and a bushbuck horn ferrule. You can't buy a knife this perfect!
Take an average looking knife and make it extraordinary. This was a inexpensive Santuko with a nice blade and a cheap handle. Now it's an extremely sharp knife with a new gorgeous ebony handle
Take your everyday knife and make it more comfortable for your hands. My friend and coworker wanted to upgrade his work knife, I helped him out by making a new custom handle and saya. It was free for him and all made with scraps from my shop!
My basic prep knife, an old warhorse the Akira-Saku Blue #2 Bunka 180mm, and rehandling transforms it into a new knife. knife is shown with a new unmodified knife
Upgraded Masamoto KS Honkasumi Gyokuhaku-ko Buffalo Tsuba Japanese Petty Knife 165mm. It came with buffalo horn on a D-shaped ho wood handle and I thought I needed to do it justice. I made a buffalo horn, sandalwood, and purple heart octagon handle. Worth every penny!!!
I've had this knife since 1995, and when it came back from the Philippines there was no edge left and it was in need of a makeover. First I changed the blade angle to 12 degrees for better performance, then I removed any sharp corners and polished it to a mirror finish. Then I reshaped the handle for comfort.
I've had this knife forever, an old favorite of mine. After more than 20 years of use and abuse in restaurant kitchens the POM handle had cracks and the bolster was making it harder to sharpen to where the belly of the knife was worn and didn't touch the cutting board anymore. I removed the handle and replaced it with teak and mosaic pins, then ground off the bolster and fixed the belly back to the classic French style knife shape
A customer in Michigan wanted his mother's knife that had a cracked handle redone in ebony. So i picked a jet black piece of Gaboon ebony, black buffalo horn, white G10, nickel silver pins and a center mosaic pin.
A customer brought me an old Gustav Emil Ern knife missing it's handle. I fixed the blade shape, ground back the bolster, then re-blued the metal to match the patina, then made the handle out of Claro walnut . I added mosaic pins and sharpened it
A customer brought me a knife that had belonged to his father, it had seen better days. The handle was destroyed, but the blade was perfect . It was an old Sabatier , the owner picked a nice piece of black and white ebony from my shop and I made a new handle
An old friend of mine had a duct tape covered broken handled wusthof Santuko in his garage, so I took it home and cleaned it up, reground the blade and then rehandled it with snakewood grips
Price ranges from $40-60
a family member asked for a set of kitchen knives ; all 1095 and 15n20 high Carbon Damascus steel blades and colorful micarta handles
This twist pattern Damascus blade with 4-6,000 year old bog oak handles was made for my cousin by request
High Carbon Damascus steel blade has a nickel silsilver bolster, olive green coarse weave canvas micarta handle scales, black and green g10 spacers and 3 mosiac pins
Raindrop Pattern Damascus blade with a green spacer, nickel silver bolster, green and black micarta handle, 2 green g10 pins and a g10 lanyard hole
Mokume bolster, and Mokume look black Rafir handle with 2 large brown micarta pins and brown spacers
Twist pattern semi-flexible Damascus blade has a brass bolster, brass and pink g10 spacers and 3 brass pins. Probably rosa wood handle has a pinkish hue and is very light weight
Damascus clad 1095 blade with a brass bolster, blue G10 spacer and pins, and stabilized, dyed, Spalted tamarind
Ladder pattern blade with blue and black spacers, stainless steel bolster, 2 g10 pins and a g10 lanyard hole
Add a description about this category
high carbon 1095 steel blade is great for breaking down large pieces of meat and cutting steaks. Handle is 2 shades of purple: purpleheart with a purple dyed linden burl ferrule and butt
8 inch semi-flexible 440C Stainless steel blade with a layered wood handle (red, orange, and yellow) 2 red g10 ,a skull and crossbones, and a lanyard pins.
4-3/4 inch 440C Stainless Steel knife is just as at home in the kitchen as it is filletting a trout beside a brook. Rosewood grip is molded to fit your hand perfectly
6 Inch Stainless Damascus Boning Knife With A Vg10 Core And Acrylic Handle with decorative screws holding the scales in place. Nickel silver bolster finishes it off
High Carbon twist pattern Damascus steel blade, steel bolster and firestorm crazy fiber micarta grip with blue G10 pins
Beautiful Australian coolibah burl handle with mosaic pins attached to a sharp 5 and a half inch 440c stainless steel blade. Includes a custom made amarela wood saya.
Twist pattern damascus of 1095 and 15N20 with a contoured damascus bolster and a sweet demin micarta handle. As comfortable as that pair of jeans you are wearing, and topped off with 2 red G10 pins.
Semi flexible 8-1/2 inch high carbon semi stainless D2 tool steel blade with "Damascus" micarta and grey juma handle. Knife includes a white plastic sheath for safe carrying and storage
Semi-flexible 5 inch blade with a red jasper ferrule and a layered imitation ivory and bloodwood handle with red G10 pins
Sharp flexible blade with custom wenge handle and mosaic pins. Includes a nylon sheath. Simply beautiful
Add a footnote if this applies to your business
5 Layer blade has a 15n20 shim surrounding a core layer of 440c Stainless steel etched with acid to darken it is capped with a nickel silver bolster, a custom mosaic pin, and a green and blue colored micarta from Ukraine 🇺🇦. It also has a acid green spacer and 2 hollow pins
Vg10 Stainless steel blade with Damascus cladding, bismuth bronze bolster, black and blue spacers, 3 mosiac pins. Incredible desert ironwood handle
4116 Stainless steel blade, nickel silver bolster, black, white, black, red spacers, 3 mosiac pins, twisted hex natural color micarta and black resin scales
4116 Stainless steel blade witha nickel silver bolster, black and blue spacers, 3 mosiac pins and exquisite Afzelia Xylay scales
Black and red G10 is finger grooved with black rubber spacers, hidden pins, dovetailed G10 bolster, a red and brass mosaic skull pin
8 inch blade is Nitro-V super stainless steel with a san mai jacket with copper and stainless steel in a mosaic pattern, by Dion Damascus. The handle has a marbled horn ferrule and butt with white and steel spacers, decorative mosaic pin and a Brazilian ebony center. Includes a leather blade protector
Blade is Dion Damascus mokume mosaic with a Nitro-V super stainless steel core. American cherry octagon handle has a black buffalo horn ferrule and carbon fiber and double nickel silver spacers.
8 Inch blade of water-jet cut 14C28N stainless steel has a perfect taper and is highly polished. The handle is of fossilized mammoth ivory tusk from Siberia with a custom blue mammoth mosaic pin and a nickel silver bolster
8 inch seax style 14C28N Stainless steel chef's Knife With A nickel silver bolster. Double dyed, stabilized Box Elder burl grips with crazy fiber micarta spacers. Handle has a blue skull and crossbones custom mosaic pin and 2 green g10 pins with a custom made saya
6-3/4 Inch mirror polished HAP40 Chef's Knife With A Twisted Buffalo Horn Ferrule And Blue Dyed stabilized maple burl handle. Mosaic pin mechanically holds blade in place. A custom made saya is included
tiger-stripe mokume blade has copper over a core of Nitro-V super stainless steel.chrysoclla gemstone handle is offset by multiple layers of spacers and mosiac pins. includes a mahogany saya
High Carbon Damascus steel has a vintage crosscut linen micarta handle with brown paper micarta pins, custom mosaic pins and a copper bolster
Blade is cut by water jet from 14C28N Stainless steel. Handle is Red River Gum Burl, katalox bolster, and 3 mosiac pins
8 Inch Marine Corps Tribute AEBL Chef's Knife. Handle is thunderstorm Kevlar and Bengal crazy fiber micarta, with custom mosaic pins
Ladder Pattern Damascus Chef's Knife With A copper bbolster, desert Ironwood Handle and 3 mosaic pins
7-1/2 Inch ladder pattern Damascus clad 1095 blade is paired with a vintage crosscut paper micarta and 2 stainless steel pins and a lanyard hole. Center pin is brown linen micarta
Ladder pattern Damascus Chef's Knife With A Damascus bolster, Surinam Ironwood Handle has blue and black spacers and 3 mosiac pins
Raindrop Pattern Damascus Chef's Knife with a paduak handle and a layered ferrule of stainless steel, brass and walnut
K-tip twist pattern Damascus with a stainless steel bolster, leather and brass spacers and a yellow pear handle
Stainless steel kiritsuke style tip for detail work. Ebony handle has a paduak ferrule and blue-red-blue spacers
Vg10 Stainless steel blade core , with black twist pattern Damascus cladding. Yellow Pear Handle with a red spacer
Spring steel blade is blued and has a custom copper and brass mokume bolster, blue stabilized Pinecone scales with mosaic pins And Matching blue Saya
512 Layer ladder pattern Damascus Chef's Knife, nickel silver bolster, crazy fiber micarta handle, and maroon g10 pins
Vg10 Core with a twist pattern stainless Damascus cladding , rosewood handle has carbon fiber spacers
High Carbon twist pattern Damascus blade with a Damascus bolster and red and black spacers. Handle is a pink Kiribati Coral with 2 mosiac and 2 maroon g10 pins
K-tip Chef's Knife has a very tight pattern high Carbon Damascus steel blade and the Wengehandle has an African blackwood ferrule
Blade is Baker elite coppermai-ripple steel. Handle is purple honeycomb aluminum mesh with green, black, and teal hex spacers with a bismuth bronze (lead free) ferrule. Includes a custom picana wood saya
8 inch high Carbon Damascus of 1095 and 15n20 steels with red and green spacers, custom mosaic and hidden pins. Natural green and red marble handle and green saya
Black San mai blade has a vg10 core with a stainless steel bolster. Red and white spacers and box Elder Handle finish it
Sharp 440c Stainless steel blade is mated to a wa handle of Honduras rosewood with a katalox ferrule. Includes a custom ash saya
Random pattern stainless Damascus blade with carbon fiber spacer and black and white ebony handle. It also has custom Purpleheart saya
Features copper bolster black , gray and copper spacers, 3 hollow pins (1 is mosiac and 2 are black G10), and grips that are copper "snake skin " carbon fiber by FatCarbon
Add a description about this category
Square to octagon bloodwood handle with a black buffalo horn ferrule, red palm butt, and brown paper micarta spacers. 9 inch raindrop pattern carbon steel Damascus blade is forged from 1095 and 15N20
9 inch blade of AEB-L high carbon stainless steel with a beautiful juma and buffalo horn handle . Blade concept is weight forward design I have nicknamed "kilij," after an ancient Turkish sword with a similar tip. This sword was the favored weapon of Vlad the Impaler
K-tip gyuto with 5160 high carbon spring steel blade and a cool custom handle of aluminum hexagonal mesh with black and white resin and a juma bolster and a custom made matching saya
8 Inch highly polished twist Damascus Bowie style Chef's knife. Blade is high carbon 1095 and 15N20 steel. Handle is hand carved eastern European red stag in the shape of an old man's face
Blade is half kourouchi finished and half etched Damascus steel with a square to octagon handle of padauk and a bronze inlace acrylester
1095 and 15N20 high carbon steels in a twist pattern Damascus Chef's knife blade with a Whitetail deer antler handle. The ferrule is stabilized spalted maple with a leather spacer
D2 high carbon tool steel blade with a nickel silver bolster and stainless steel pins. Handle is wenge, an African hardwood that appears striped. D2 is not stainless, but is considered semi stainless, and is a great blade steel, razor sharp edge and mirror polished finish. it also includes a custom made matching wenge saya.
The kourouchi finished blade is forged from solid 1095 and is built for all your heavy duty prep items. Chopping turnips, pumpkins, and winter squash; all the tasks you don't want to do with your Japanese knives. The handle is genuine lignum vitae, and the beautiful green color is complemented by the Burmese Blackwood ferrule and butt and the white gum spacers. The heavy wood balances the heavy blade nicely
20 Layers of stainless steel on both sides of a VG10 cutting core in a swirl pattern attached to a poly resin Handle with bloodwood ferrule and butt and carbon fiber spacers. It comes with a custom made splatter paint saya.
Low-level stainless Damascus with a VG10 cutting core is sharp, and the beautiful cocobolo (a true rosewood, dalbergia sp.) Handle with dark, almost black wenge ferrule and butt is offset by the nickel silver spacers.
Ladder pattern Damascus Chef's knife with a copper bolster, dalmata wood grip and oversized hollow mosaic pins
20 Layers on each side around a core of VG10 with a swirl pattern running up the middle of the blade is visually striking and set off with the Burmese Blackwood, Indian ebony, and copper spacers; it's beautiful. The kiritsuke style blade tip is stylish and with the curve of a traditional Chef's knife it is usable for anyone, not just a trained professional chef.
6 inch 440c stainless steel blade with stainless steel bolster, beautiful mora wood, sometimes called eastern mahogany, handle with mosaic pins
Real eastern European red stag antler handle is hand carved in a bearded man's face on the butt and 3 layered wood ferrule (African Blackwood and curly maple), is attached to a 9 inch fire pattern Damascus Chef's knife blade.
Super thin and lightweight twist pattern Damascus Chef's knife has a stabilized spalted maple handle and black micarta pins. Very comfortable finger grooves will help you hold on to the super smooth wood.
Raindrop pattern 1095 and 15N20 Damascus steel kiritsuke blade is beautiful and aggressively styled, mated to a purple dyed, stabilized, Linden wood burl handle. European Red stag ferrule and butt with malachite turquoise spacers. Handle is octagonal, except the antler ferrule is naturally shaped
Hand forged 9 inch blade of 80CrV2 with a leopardwood, padauk and African Blackwood handle
Light, thin 8inch blade is made from Z-finit super stainless steel with a solid handle of blue and black juma and a turquoise ferrule
Thin, lightweight, lightning fast blade of Z-finit stainless super steel attached to a Birdseye maple and padauk handle with nickel silver spacers
Kiritsuke style blade is 5 layers and has a vg10 core. Handle has zircote and Cocobolo ferrule and butt with a blue scale juma center
Stainless Damascus steel blade is mated to a custom hand Carved antler handle in the shape of the grim reaper
Add a description about this category
Highly polished 6 inch blade of solid stainless steel with a wenge handle and custom saya
VG10 core rose pattern Damascus stainless steel with a octagon handle of bocote, bird's eye maple and African Blackwood. Comes with a custom bird's eye maple saya with a tethered titanium pin
Acid etched Damascus steel blade with "Damascus looking" micarta grips, buffalo horn butt cap, titanium and mosaic pins. Includes a custom coffee wood saya
Ever wanted the biggest knife in the kitchen? Sharp twist pattern, acid etched, Damascus steel blade with a beautiful bicote wood handle, mosaic pins, and an equally large hardwood saya
The blade is made from 440c stainless steel, and the handle is ironwood and yellowbox burl with red G10, copper, and abalone spacers. Includes a custom antique elm saya
Add a footnote if this applies to your business
Add a description about this category
Raindrop Pattern Damascus Bunka has a resin burl ferrule and, brown paper micarta spacers and a Koko handle
Wa Style Handle is made of olive wood with a African blackwood ferrule and a half kourochi blade clade in wave pattern Damascus
Add a description about this category
I call it Jay's knife because it was a custom order for a friend named Jay. 5 inch stainless Damascus clad VG10 core features a ladder pattern. Handle is stabilized curly koa with a mammoth ivory ferrule, black, white and nickel silver spacers and a punisher mosaic pin. it also includes a custom made saya
Random pattern 7-1/2 inch high Carbon Damascus steel bunka knife with a 2 color eucalyptus burl handle. Resin burl ferrule and butt, yellow box burl center, and copper spacers
Raindrop pattern 8 inch high Carbon Damascus steel bunka knife. Handle is a rare makore wood with wormholes. It has a Muirapixuna Ferrule and butt
Twist Pattern Damascus blade is light and nimble, Spalted maple handle is paired with black and white spacers and black
Raindrop Pattern high Carbon Damascus steel bunka knife with a African blackwood ferrule and red sandlewood wa style handle
raindrop Pattern Damascus blade is paired with a walnut handle with a black Buffalo Horn Ferrule
Raindrop Pattern Damascus Kiritsuke With Red Palm Handle, carbon juma ferrule, African blackwood butt,and curly maple spacers
Vg10 core with Damascus cladding has a grey TeroTuf spacer and a box elder handle
Add a description about this category
7 inch twist pattern damascus blade of 1095 and 15N20 high carbon steels is attached to a striking handle of Mexican zircote and osage orange with brass spacers
Raindrop pattern Damascus blade is acid etched on the top half and highly polished on the bottom. Bronze inlace acrylester is followed by a sandwich of copper and brown paper micarta spacers with a beautiful hard curly maple butt
Add a description about this category
Black and White Ebony handled stainless steel san mai 7 inch wide bladed santuko. Includes custom matching saya. That's right, ebony is not always black, and this was the most perfect piece of black and white I found. Blade is 7 inch san Mai construction with a VG10 cutting core and softer stainless steel cladding.
Aus 8 core San Mai Japanese Inoguchi blade with a custom made 2 color ebony wood handle, and rosewood saya
Add a footnote if this applies to your business
Twist pattern high Carbon Damascus steel blade with nickel silver bolster. Snakeskin pattern micarta handle has 2 maroon micarta pins
Add a description about this category
Twist pattern damascus blade attached to a macassar ebony handle with zircote and cocobolo ferrule and butt and nickel silver spacers. A dark and sweet knife
8 Inch Stainless Damascus steel Slicing Knife With a vg10 core. Maple burl and turquoise colored composite handle with a Stainless steel ferrule, decorative mosaic pin, bright bronze and black spacers
440c single bevel blade with a yellow box burl handle, bimblebox burl ferrule and butt and a purple linden burl
Black San mai blade has San Vg10 Stainless core. Handle is jet black ebony and has a black Buffalo horn ferrule, butt and spacer along with 3 brass spacers
Add a description about this category
Twist pattern damascus blade with lacewood, thuya burl, and ebony handle
Add a footnote if this applies to your business
Add a description about this category
8 Inch Damascus blade is made from 1095 and 15N20 high carbon steels in a twist pattern. The layered G10 handle has 2 black micarta pins, a center mosaic pin, and mosaic lanyard hole. Includes a custom leather blade cover.
3-1/2 inxh stainless Damascus steel Paring Knife with a vg10 core. Brazilian ebony ferrule and Zebra Wood Handle
2-3/4 Inch Damascus Paring knife With Rafir Handle, aluminum and black and blue spacers. Blue skull and crossbones mosaic pin and blue G10 pins. Nickel silver bolster
Ladder pattern carbon steel Damascus blade with a brushbuck horn ferrule and paduak handle
Stainless Damascus steel blade has a vg10 core with a zebrawood handle and a katalox ferrule
Add a description about this category
Matching pair of 4 inch 440c Stainless Steel blades pinned and epoxied to custom figured walnut handles. Blades are long and narrow for delicate peeling and paring
Matching pair of 4 inch 440c Stainless Steel blades pinned and epoxied to custom belli handles with red jasper ferrules. Blades are long and narrow for delicate peeling and paring
Matching pair of 4 inch 440c Stainless Steel blades pinned and epoxied to custom desert ironwood handles. Blades are long and narrow for delicate peeling and paring
Add a description about this category
Twist pattern Damascus of 1095 and 15N20 high carbon steels in a 7-3/4 Utility/petty knife. Perfect for all around use, and the beautiful green and gold acrylic handle with mosaic pins makes it stylish
Add a footnote if this applies to your business
High Carbon Damascus of 1095 and 1084 steel is not acid etched, but clearly visible raindrop pattern with a olive wood handle with a African blackwood ferrule
Add a description about this category
8 Inch mirror polished and razor sharp blade of AEB-L features an S-grind to aid in food release. The Ukrainian hand carved red stag antler handle is incredibly comfortable and sturdy, and has what I call a Death's Head.
Wide blade of 440c steel with an octagon handle of red sandlewood and African blackwood ferrule
The fancy filed spine and ladder pattern Damascus Cleaver is offset by the beautiful Cocobolo handle , stainless steel pins and lanyard hole
Black tool steel blade is paired with a black and gray zircote handle with stainless steel
NO ITEMS TO SHOW
Add a description about this category
Razor sharp, Hand forged blade of 80CrV2 is mated to an octagon wa style handle of Indian ebony and Pau Santo with red G10 spacers
1095 and 15N20 High carbon steels in a twist pattern Damascus with a custom made snakewood and red river gum handle with red and white G10 and silver spacers. Includes a custom walnut saya. Blade has a couple visual imperfections that will not affect use, but obviously has made the price lower
Razor sharp 6-1/2 inch 440c stainless steel blade Nakiri with a beautiful custom wa handle of blonde horn and Lacewood
Add a footnote if this applies to your business
If you are looking for a style or an idea
A tight double twisted 1095 and 15N20 Damascus blade is mated to a super hard katalox handle. The handle is small for comfort of people with smaller hands and is set off with 2 mosaic pins and a red jasper ferrule.
3-3/4 inch blade is sharp and perfect for boning out meats, fish, and poultry. Handle is olive wood with resin burl ferrule and butt and a green variscite and maple spacers. Resin is a type of eucalyptus burl from Australia and it has a beautiful reddish color
Petty/Utility knife is sharp 440c stainless steel with a beautiful yellow colored Osage orange handle. It also has an oversized hollow mosaic
Kourouchi finished Damascus steel blade with ebiara wood, also known as red zebrawood, handle and 3 mosaic pins
High carbon 5160 steel blade with ground in hammered pattern to aid in food release is mated to a perfect piece of Mexican zircote with 2 small mosaic pins
10 inch hand forged blade of 52100 high carbon steel kiritsuke style blade with a beautiful Burmese Blackwood, Indian ebony, and copper spacers.
Muirapixuna and Birdseye maple handle with carbon fiber spacers starts out oval and then becomes octagonal. The blade is a twist pattern referred to as a fire pattern because of the thicker layers of 1095 intermixed with thinner ones and 15N20.
Handle is made of hormigo (or Macacauba), with thuya burl ferrule and butt, and a green variscite spacer. Blade is a 9 inch kiritsuke of my own design, forged from 1095 and 15N20 in a raindrop pattern
A 6 inch blade of mirror polished high carbon 80CrV2 with a 50/50 grind edge for right or left handed use. It also has a beautiful rosewood handle with a buffalo horn ferrule.
Semi stiff 1095 and 15N20 Damascus steel blade with a beautiful stabilized Redwood burl handle and 3 mosaic pins
Blade is thin ground 440c stainless steel with abalone covered with acrylic handle, 2 mosaic pins and a mosaic lanyard hole. Includes a custom made leather sheath
Fire pattern Damascus Chef's knife of 1095 and 15N20 is 9 inches long. Handle is curly maple with African Blackwood ferrule and butt, and brass spacers.
Chrysocolla is a copper stone, ranging from light green to deep blue, and is a beautiful handle material. With African Blackwood ferrule and butt and black juma spacers mated to a 9 inch raindrop pattern Damascus kiritsuke
Crazy looking, but totally useable. The perfect knife for working on the line, and a great conversation piece. Thin, razor sharp 80CrV2 blade, aluminum ferrule and natural warthog tusk all together with a custom made cumaru saya
Add a footnote if this applies to your business
The bright red chakte kok handle is offset with a stripe of teak and a ferrule made of bushbuck horn. The blade is hand forged from 1095 and 15N20 high carbon layered and twisted into a simple but beautiful pattern
Handle is figured walnut with a African Blackwood ferrule, blade is 13-1/2 inches of curved Japanese white steel clad with 16 layers of Damascus
8 inch acid etched twist pattern Damascus Steel blade with a flame singed hard maple and African Blackwood twisted octagon wa handle. Comes with a custom made saya. The handle alone took 2 weeks to complete, I couldn't stop until it was perfect!
This knife's blade is made of 101-layer Damascus. It is constructed by forge-welding 50 layers of 410 Stainless Steel per side around a single core layer of X105CrMo17 Stainless Steel for a total of 101 layers with a final hardness HRC 60-62, ebony Handle, mosaic pins and custom bicote saya. A handmade kitchen knife any chef would want, an edge that is razor sharp and stays that way!
Twist pattern Damascus high carbon steel blade. Beautiful checkerboard handle of alternating pink ivory and purple heart woods, with buffalo horn and G10 accents. Custom zebrawood saya included. Perfect all-purpose prep knife!
Canary wood handled paring knife with 3 layer Japanese style blade with vg10 cutting core, mosaic pins and custom saya.
I started with a rough blade blank of agnomi super blue steel and ground it to single bevel edge. Sharp and ready to slice fish and/or meat paper thin. I handled it with purple heart, a bocote ferrule, and teak and cocobolo accents. Comes with a matching custom purple heart saya.
VG10 core clad in 25 layers of Damascus steel each side for a total of 51 layers, through tang construction with a katalox and sandalwood handle. Equipped with a beautiful purple heart saya
Ebony and blond horn handle on a razor sharp kiritsuke style Chef's knife with a custom saya included
Thin, lightweight 9 inch Damascus Chef's knife with a raindrop pattern carbon steel blade. The wa style handle is coolibah burl with yellow box burl ferrule and a red river gum butt cap. Includes a custom made saya
Buffalo horn ferrule, Birdseye maple, and African Blackwood butt cap make up the wa style handle on this 7 inch 1095 and 15n20 Damascus steel Santuko
Mexican zircote handle, mosaic pins and "Damascus" pattern micarta bolster on a 1095 and 15N20 high carbon steel twist pattern Damascus Chef's knife
1095 high carbon steel blued blade with red and black layered micarta grip
1095 and 15N20 high carbon steels twist pattern Damascus with a hammered kourouchi finish and a multi colored birch pakka wood handle and copper pins
Hammered kourouchi finished 1095 blade, turquoise bolster and red sandalwood handle with mosaic pins
Hammered Damascus steel with a kourouchi finish, rare African kosso wood handle and mosaic pins
1095 and 15N20 twist pattern Damascus with a hammered kourouchi finished bunka with a bronze bolster and tigerwood handle
Sharp 8 inch blade of D2 semi stainless tool steel, with a custom made ancient bog oak handle, 3 layers of spacers, mosaic and yak horn pins and a custom made saya of antique oak
Raindrop pattern Damascus carbon steel blade with a beautiful maple burl and blue composite handle and mosaic pin. Includes a custom made figured walnut saya
I made this for a friend during the covid19 pandemic. 8 inch blade of 1095 and 15N20 Damascus steel with a Pau Santo and African Blackwood handle and a custom made saya of walnut
I made this knife during the covid19 pandemic for a friend. 8 inch raindrop pattern Damascus Chef's knife with a beautiful maple burl handle and custom mosaic pin, bronze bolster, and walnut saya
8-1/2 inch blued steel blade of 80CrV2 with a Bowie style tip, and enough of a belly to rock. My first finished knife in this style, with a custom handle of Brazilian ebony on both ends, nickel silver spacers, and muirapixuna wood grip
Sharp 1095 and 15N20 ladder pattern Damascus Chef's knife with a square aluminium ferrule and a brown and white striped Pakka wood handle and a custom made saya
custom cocobolo and buffalo horn handled santuko gives you perfect balance to chop all day in comfort. Hammered Damascus stainless steel 7 inch blade witha VG10 cutting core, and custom dalmata wood saya
Desert ironwood handle with oversized mosaic pins and stainless Damascus steel blade. Includes a custom saya of flame maple. This knife's blade is made of 101-layer Damascus. It is constructed by forge-welding 50 layers of 410 Stainless Steel per side around a single core layer of X105CrMo17 Stainless Steel for a total of 101 layers with a final hardness HRC 60-62, which provides high strength, hardness, and wear resistance.
Hammered stainless steel Damascus blade with a VG10 cutting core and a handle of solid African Blackwood. A custom matching saya of Blackwood is included
Acid etched 6 inch stiff, curved 1095 and 15n20 twist pattern Damascus steel blade with coolahah burl grips and mosaic pins. With a custom belli saya
Blue inlace alcalester and turquoise Handled 8 inch raindrop pattern Damascus Chef's knife with a custom matching saya
Acid etched razor sharp blade of twist pattern Damascus carbon steel, amboyna burl and buffalo horn handle. It comes with a custom Cumaru wood saya
Kiritsuke style blade is polished carbon Damascus steel (ladder pattern is visible close up only). Thick enough to handle the heavy prep items, but with a beautiful cocobolo and amboyna burl handle, and a coffee wood saya.
Sharp 10 inch Damascus blade is acid etched to show the beautiful twist pattern, with a bocote wood grip, oversized mosaic pins, and an African Blackwood butt cap. Includes an antique oak saya
Custom 10 inch raindrop pattern Damascus kiritsuke, polished carbon steel blade. Buffalo horn and olive wood octogon wa handle with brass spacers and decorative pins
Kiritsuke style blade is sharp with a beautiful acrylic handle, 2 small mosaic pins and a custom vinyl saya
8 inch carbon Damascus steel blade with a beautiful feather pattern and wa style handle of African Blackwood, amboyna burl, and snakewood. Includes a custom padauk saya
Hard 5160 carbon spring steel core with a softer iron cladding in a traditional Japanese style forging, with an Andria wood handle with black and white buffalo horn ferrule.
Drew's new knife is a Razor sharp stainless Damascus Chef's knife with a chakte kok ferrule and solid turquoise handle and mother of pearl butt. It also has a Custom saya of solid padauk
3 1/2 inch blade of 440 stainless steel, with a custom made grip in your choice of materials (shown in inlace acrylester). Most will only take 2 days to fabricate and finish. Pointed for opening oysters. Perfect for restaurant and oyster company gifts.
American elm burl handle with an oversized mosaic pin on a blade of 1095 and 15N20 high carbon steels mashed together in a raindrop pattern with a custom saya of bird's eye maple
This pair of Japanese style boning knives is forged from 1095 carbon steel, and 1095 and 15N20 Damascus. Both feature a figured camphor handle, custom pins, and a mango wood saya. A customer ordered 1, and when the postal service lost it I had to make a new knife to replace it. This time it was delivered
Muirapixuna handle with a Birdseye maple ferrule with a custom walnut saya
Highly polished blade, dalmata wood grip, brass pins, oversized mosaic pin, and grey custom made saya
Raindrop pattern Damascus of 1095 and 15N20 high carbon steels, 8 inch blade with bocote wood accents, mini mosaic pins and turquoise with a gold web pattern custom made grips.
Chakte kok and bloodwood wa style handle attached to a 7-3/4 inch acid etched Damascus blade
Acid etched 9 inch VG10 stainless steel Chef's knife with an alternating 2 color eucalyptus burl (yellow box burl and coolibah burl) on a 45° angle. It also has a Brazilian ebony butt and ferrule
Chef's knife with a 1095 and 15N20 Damascus steel blade and a real whitetail deer Antler handle and a red palm wood ferrule and carbon fiber
Borneo rosewood handle with a macassar ebony butt and muirapixuna ferrule with white G10 spacers. 1095 and 15N20 fire pattern high carbon Damascus steel 9 inch Chef's knife
Highly figured walnut handle with a bushbuck horn ferrule and a black buffalo horn butt. It has white G10 and double nickel silver spacers. Fire pattern Damascus is made of 1095 and 15N20 high carbon steels. Saya is made of antique recycled walnut flooring.
Lightly rounded tip, one blunt edge, one sharp edge (only sharp enough to open clam shells), a knob on end of the handle prevents slipping.
Pick your favorite handle materials (shown in inlace acylester).
Mango wood handled Chef's knife with a low level stainless steel Damascus and VG10 cutting core. Includes a matching saya.
A while ago someone asked me to make a knife like this, so I finally did. American cherry handle, feather pattern stainless Damascus Chef's knife with a large mosaic pin and full tang blade. Comes with a custom made saya of reclaimed antique American elm
Stabilized spalted tamarind handles and matching saya with mini mosaic pins
Hand hammered Semi-stainless D2 tool steel blade with aggressive design and a custom handle of stacked purple heart, and hard maple, topped with Kingwood, mini mosaic pins and a custom made cumaru wood saya
Have you ever wanted to own a custom knife, made just for you with it's own handmade saya (sheath), or have your favorite knife rehandled. Totally reimagine that old knife. I can and will do it all. Want your western style knife to have a Japanese style octagon handle, no problem. Email me your ideas, mail them to me, or visit me in person, just call, text, or email me first to set up a time. チャド is my new signature
A beautiful, highly or barely visible, unique pattern. High carbon steel gets extremely sharp and holds its edge. A tropical hardwood handle, western style or wa (Japanese style). Animal horn accents, a mother of pearl inlay, or a durable and vibrant synthetic grip. You imagine it, I can make it. custom kitchen knives
Contact me, tell me what you want, and I will make it
Remove the bolster from your European knife, reshape or replace the grip. The possibilities are endless!
Call me first, and then you can come over and drop off your knives to be sharpened, I will text you when they are done and ready for pick-up. Usually it takes 2-3 hours to get done, sometimes it takes a full day because of my work schedule
Once a stainless steel blade is sharp, it is done, but a carbon steel blade can always get a little sharper. The blade angle of European/American knives will allow your knives to be sharpened but it will be a short term thing, and sometimes the steel is so hard it is very difficult to get them sharp. Where as the lower angle of Japanese knives allows the blade to be thinner, sharper, and easier to resharpen
I don't have a waiting area, so it is best to drop off
Some knives that need repair and/or grinding to get an edge formed could be more. Until I finish I can't be sure how much it will cost.
Cash, personal check or money order (made out to Chad Manning), PayPal, Venmo, and Cash ap
Sign up to hear from us about specials, sales, and events.
41 Lords Lane, South Berwick, Maine 03908, United States
(207) 689-0100 / cell (207) 216-0645
Copyright © 2024 Handmadekitchenknife.com - All Rights Reserved.
Powered by GoDaddy